• 1,000+

    installations over 10+ years

  • 24/7

    support for managed-service clients

  • Excellent

    Rated 4.9/5 by 110+ NYC corporations

  • 7 Active Teams

    Operating throughout New York

Are You Facing?

As a physical security consultant in NYC, we start from where your project is today.

Three layers of a commercial security system: openings, infrastructure and platform, delivered by one team.
  1. Your situation

    New building or fit-out

    01
    What we doDesign security at schematic design or design development, before the door and electrical packages are fixed.
    What to expect

    Hardware, risers and power are planned while they can still change; later usually means change orders. Drawings and specs are coordinated with the architect's door, frame and electrical packages.

  2. Your situation

    Upgrading an occupied building or campus

    02
    What we doWrite a security master plan, then phase the upgrades around how the building is used.
    What to expect

    Sound cabling and hardware are reused where they can be. At Washington Market School the work was phased so the school kept running.

  3. Your situation

    After an incident or a change of use

    03
    What we doReassess the property and rank each risk before you buy hardware.
    What to expect

    Some gaps close with layout and lighting, using CPTED principles, before any technology is added. You receive a ranked list of what to fix first and what can wait.

  4. Your situation

    A landmark or historic building

    04
    What we doDesign around Landmarks Preservation Commission rules with wireless locks and concealed routing.
    What to expect

    Surface cable and visible hardware on historic fabric are constrained. Where nothing stock fits, we engineer and fabricate the door hardware in-house, as for Carnegie Hall.

What a Security System Design Includes

A security system design defines every device, door condition and cable path before construction.

01 / 06

Door hardware schedule

What we deliver

Lock, power, egress condition, reader and door position switch for every controlled opening.

Why it matters

Strikes and power transfer hinges go into the door and frame order, so doors arrive prepared.

02 / 06

Layouts and riser diagrams

What we deliver

Device locations and connections back to IDF and MDF rooms.

Why it matters

Cable paths and riser space are reserved before walls close.

03 / 06

Network design

What we deliver

Switching, PoE power budgets, firewalls and segmentation for security devices.

Why it matters

Power for readers and cameras is not left to the electrician after walls close.

04 / 06

Specification sections

What we deliver

CSI MasterFormat Division 28 sections for the bid documents.

Why it matters

Bidders price the same system. Specifications are NDAA-compliant for federally funded clients.

05 / 06

Code and egress review

What we deliver

Fail-safe and fail-secure decisions, release requirements and ADA operability, per opening.

Why it matters

Code questions are settled on paper, not at inspection.

06 / 06

Budget and phasing plan

What we deliver

An order-of-magnitude budget and phasing for an occupied building.

Why it matters

You approve the scope knowing roughly what it costs and how it is sequenced.

Our platform partners

We design on the platform that fits: certified Salto dealer; dealer and partner for Brivo, LenelS2, Software House, Exacq, Axis and HID; Cisco Meraki and Alta Labs partner. We also design on Genetec and Dorma.

SaltoCertified Salto dealerLenelS2Software HouseGenetecBrivoHIDDormaAxisExacqCisco MerakiAlta Labs

Proven on Commercial and Institutional Projects

Our consulting comes from delivery on high-profile New York projects.

★★★★★
“Tony came out and mapped out camera locations that actually made sense for our layout. The security camera installation team finished everything in one afternoon and the footage quality is sharp even in our poorly lit back office.”
Lucas Ross, office cameras

Planning a fit-out or new build?

Get a security design contractors can price.

Rated 4.9/5 5 stars by 110+ New York City businesses

Access Control Design: Code Decisions at Every Door

Access control design succeeds or fails at the opening, so we settle each decision per door.

01 / 04

Fail-safe or fail-secure

What we deliver

The right fail mode for every door, recorded in the schedule.

Why it matters

Egress doors release on fire alarm or power loss when they must. We coordinate the release with your fire alarm vendor; we do not install fire alarm systems.

02 / 04

Maglocks on egress paths

What we deliver

A request-to-exit device and manual release on every egress maglock.

Why it matters

NYC Building and Fire Code requires both, so the door passes inspection.

03 / 04

Delayed egress

What we deliver

Approval secured before delayed-egress hardware is installed.

Why it matters

Nothing goes on the door that may have to come off.

04 / 04

Readers, controllers and power

What we deliver

Readers matched to the platform, with PoE budgets and riser space planned.

Why it matters

Every reader works on day one with no added interface.

Two Ways to Engage

We offer design and consultancy as a standalone service, and we work alongside other vendors if you prefer.

StageDesign and consultancyDesign-build
Assessment and designYesYes
Bid review against the designYesYes
Submittal review and construction administrationYesYes
Installation, integration, commissioning and testingAdd with design-buildYes
Training, handover and maintenanceAdd with design-buildYes
Why it matters

With design-build, the decisions made in design are the ones we answer for on site, so a problem with the spec is ours to fix. Existing clients on managed service and maintenance get 24/7 support, with a 4-hour response on critical failures.

Managed security and maintenance

From Physical Security Assessment to Handover

A physical security assessment ranks every risk by likelihood and impact, so the budget goes to what matters first.

  1. 01

    Site survey

    Openings, risers, equipment rooms, existing systems and landmark status, as built.

  2. 02

    Risk assessment

    You receive every risk rated for likelihood and impact, in fix-first order.

  3. 03

    Design package

    Schedules, risers, Division 28 specs and a phased budget, ready to bid.

  4. 04

    Bid and construction

    We review bids and submittals against the design, through construction administration.

  5. 05

    Handover

    Design-only ends here; design-build continues to installation and training.

FAQs

Security Consultant FAQs

Is this physical security or cybersecurity consulting?

This is physical security consulting: access control, door hardware, video, intrusion, intercom, cabling and the network those devices use. Cybersecurity for the networks we build is a separate service, delivered alongside your IT team.

What does a physical security assessment cover?

A physical security assessment covers how people and assets move through a building and where control breaks down. Risks are ranked by likelihood and impact.

When should a developer bring in a security design consultant?

A developer should bring in a security design consultant at schematic design or early design development. Later usually means change orders.

Can we hire you for design and consultancy only?

Yes, you can hire us for design and consultancy only. We offer design and consultancy as a standalone service, and we work alongside other vendors if you prefer.

How much does a physical security assessment or design engagement cost?

The cost of a physical security assessment or design engagement depends on building size, openings and deliverables. We quote after the first consultation.

How do we choose a physical security consultant?

Choose a physical security consultant who has delivered the systems they design, knows NYC egress and landmark rules, and can show comparable projects. Our designs draw on 1,000+ installations over 10+ years, including Carnegie Hall and the Koch Theater.

Request a Security Design Site Assessment

Share your drawings and schedule. We'll tell you what the design must cover.

Rated 4.9/5 5 stars by 110+ New York City businesses

Call Site assessment