• 1,000+

    installations over 10+ years

  • 24/7

    support for managed-service clients

  • Excellent

    Rated 4.9/5 by 110+ NYC corporations

  • 7 Active Teams

    Operating throughout New York

Security system installation in Manhattan, from our office on West 40th Street. Highline Integrated Security designs, installs, integrates and maintains commercial systems across the borough.

Security Systems We Install in Manhattan

Security systems in Manhattan rarely start from a blank floor, so each one is scoped against the base-building systems already in place.

627 West End Avenue facade, Upper West Side
  • Access control

    Card, mobile credentials (phone as badge), biometric and cloud access for tenant floors and base-building doors. We are a certified Salto dealer, LenelS2 partner and Software House dealer, and deploy Genetec and Dorma hardware. Detail is on our access control installation in Manhattan page.

  • Lobby entry

    Turnstiles and optical speed lanes tied to LenelS2 OnGuard or C•CURE 9000, with visitor management at the lobby desk, so a badge works from street to suite.

  • Security cameras

    NDAA-compliant Axis and Genetec cameras on exacqVision, with real-time alerts and remote monitoring from a phone or desktop. See our commercial security camera systems.

  • Intercom and entry

    IP and cloud video intercoms that ring the tenant's phone and release the door.

  • Intrusion detection

    Sensors, panic buttons and silent alarms, monitored to alert emergency services or security personnel, with video verification.

  • Cabling and network

    Cat6/Cat6A, riser fiber and plenum-rated cable, tested and labeled through our structured cabling team, on a managed, segmented network.

Manhattan Neighborhoods and the Buildings in Each

Security system installation in Manhattan changes by district, because the building type sets the constraints.

Bronze doors of a limestone Manhattan office building with a slim card reader beside the entrance
DistrictTypical buildingsWhat we plan for
Midtown and the Garment DistrictClass A towers and pre-war lofts around our West 40th Street baseTenant systems matched to the landlord's platform
Hudson YardsNew Class A towersApproved submittals, lobby turnstile integration
Financial DistrictOlder office stock, some converted to mixed useLegacy readers bridged or replaced without a shutdown
Flatiron, NoMad and ChelseaOffice lofts and creative floorsExposed ceilings, so cable routing is designed, not improvised
Upper West Side and Lincoln CenterTheaters and pre-war buildingsBack-of-house access, work around performances
West 57th StreetLandmark halls near Carnegie HallLPC-sensitive hardware and finishes
Tribeca and SoHoCast-iron historic districts, independent schoolsLimits on surface-mounted devices; phased work, as at Washington Market School
Harlem and 125th StreetRetail corridor, institutions, new mixed-useCameras integrated with point-of-sale, rolling security gates

More on office security systems and cultural institution security.

Manhattan Projects

Our Manhattan work spans venues and landmark buildings.

★★★★★
“I manage a commercial property in Midtown and we needed turnstiles installed for our lobby. Highline Integrated Security handled the full job including the cabling and panel work. They coordinated with our building super and finished within the timeframe they gave us. The turnstiles have been running without issues for three months now.”
Bella Thomas, Midtown commercial property, turnstiles

Every system is backed by a 12-month warranty.

Planning work in a Manhattan building?

We will walk the doors, risers and approvals with you.

Rated 4.9/5 5 stars by 110+ New York City businesses

Approvals and Logistics in Manhattan Buildings

A Manhattan project succeeds or stalls on approvals and access, so we settle these before pricing is final.

  • Landlord rules and COIs

    We prepare approved drawings and certificates of insurance in the format the building engineer expects.

  • DOB alteration filings

    Where a fit-out runs under a Department of Buildings filing, our scope is coordinated inside the GC's filing.

  • Fire safety director and egress

    In high-rise offices, door release changes are coordinated with the building's FDNY fire safety director and fire alarm vendor. Locks release on fire alarm activation and loss of power where required; we do not install fire alarm systems.

  • Freight and after-hours windows

    Freight is booked by the slot and riser work runs after hours, so tenants keep working.

  • Riser and IDF capacity

    We confirm pathway space and power in shared telecom rooms first.

  • Landmarks

    LPC approval can apply in designated buildings and historic districts; wireless Salto locks and concealed routing keep visible change small.

How to Choose a Manhattan Security Integrator

The best commercial security partner in Manhattan owns the gap between the tenant system and the landlord's, because that is where most failures start.

  • Design and installation under one roof

    The team that designs it should install it, test it with the base building and stay your contact.

  • Platform depth

    Look for enterprise platforms that let a tenant system match the lobby.

  • Support after handover

    We service all major brands, including systems others installed, and upgrade existing hardware rather than ripping it out.

  • Multi-site control

    Several floors or buildings should run on one platform.

Security System Installation in Manhattan: How a Project Runs

Manhattan projects follow the building's rules.

  1. 01

    Survey with the building engineer

    Doors, risers, IDFs and fire alarm interface points.

  2. 02

    Design and submittals

    Compliance-led design, device schedule and platform, submitted for landlord approval and LPC review where it applies.

  3. 03

    Installation

    Scheduled around the building's rules; larger ones are phased by floor or after-hours window.

  4. 04

    Commissioning

    Every device tested, as-builts delivered, staff trained.

  5. 05

    Support

    Managed service and maintenance, with 24/7 support for existing clients and a 4-hour response on critical failures.

FAQs

Manhattan Security Systems FAQs

Short answers on landlord rules, cameras, choosing an integrator and cost.

Can you work within our landlord's building standard, insurance and approval rules?

Yes, we work within landlord building standards, insurance and approval rules on every Manhattan job. We prepare submittals and certificates of insurance, and match the tenant system to the base-building platform.

Do you offer security camera installation in Manhattan on its own?

We offer security camera installation in Manhattan as part of an integrated system, not as a standalone camera service. Video is designed with access control, so each door event has footage beside it.

How do we choose between commercial security companies in Manhattan?

To choose between commercial security companies in Manhattan, look for one team that designs, installs and supports the system, deploys enterprise platforms your landlord uses, and services systems others installed. Ask for landmark and occupied-building references.

What do business security systems in Manhattan cost?

Business security systems in Manhattan cost according to door count, hardware, cabling pathways and platform. We price after a site assessment, because riser access and after-hours labor often move a budget most.

Talk to One Partner About Your Manhattan Building

Tell us what the building needs. We'll design one system and support it after handover.

Rated 4.9/5 5 stars by 110+ New York City businesses

Call Site assessment