• 1,000+

    installations over 10+ years

  • 24/7

    support for managed-service clients

  • Excellent

    Rated 4.9/5 by 110+ NYC corporations

  • 7 Active Teams

    Operating throughout New York

Are you facing?

A commercial alarm system in NYC starts with the panel, doors and people you have now.

  1. Your situation

    Replacing an old alarm panel

    01
    What we doKeep sound sensors and wiring; install a panel that works with your doors and cameras.
    What to expect

    Multi-tenant buildings are phased floor by floor, so the building stays protected. We take over systems from all major brands, including those installed by others, under a managed service plan.

  2. Your situation

    New fit-out or tenant space

    02
    What we doPlan sensors, partitions and panic points on the fit-out drawings.
    What to expect

    Wired where cable can run; wireless for finished suites and historic interiors.

  3. Your situation

    Staff need a way to call for help

    03
    What we doPlace panic buttons, duress alerts and pull-cords where staff actually work.
    What to expect

    Fixed buttons sit under reception desks, cash points and security posts. Mobile duress alerts cover staff who move around a venue, store or campus. Silent alarms call help without escalating the situation.

  4. Your situation

    Too many false alarms

    04
    What we doConfirm events with video or a second sensor before anyone is dispatched.
    What to expect

    Dual-technology detectors go near heaters, vents and moving signage, and users are trained. Verification uses our commercial security camera installation work.

What staff, tenants and security get

A business alarm system should show what happened, not just that something tripped.

01 / 04

Badge arming by tenant

What we deliver

One panel with a partition for each tenant, armed by access control.

Why it matters

The last tenant to badge out arms their suite; the first badge in disarms it. The building runs common areas and the perimeter without access to tenants' settings.

02 / 04

Alarms you can read

What we deliver

Door, credential and footage on one timeline for every alarm.

Why it matters

We install the alarm, doors and readers together, so there is one call when they disagree.

03 / 04

Storefronts after close

What we deliver

Storefront glass-break, stockroom contacts and hold-up buttons at cash points.

Why it matters

Alarm events link to camera footage for fast review.

04 / 04

Dual-path signaling

What we deliver

Dual-path cellular and network communicators, with supervised sensors.

Why it matters

If one line fails, signals still get through, and a cut wire raises its own alert. Supervision sets commercial-grade systems apart from DIY kits, and the design matches your insurer's requirements.

See our completed emergency alert and security work at Lincoln Center

Emergency alerts, access control and wiring for New York City Ballet and the Koch Theater.

★★★★★
“needed fast alarm system installation after our lease required it. joey's crew had everything done in like 4 hours.”
Vincent Conner, alarm installation
★★★★★
“Called for security system repair after our old system kept false alarming. Instead of just patching it, they recommended upgrading to newer equipment that integrates with our existing structured cabling. Made the right call - system runs perfectly now and the monitoring is more reliable.”
Emery Romero, alarm upgrade

Replacing a panel or adding emergency alerts?

We'll review your current alarm and show you what to keep or replace.

Rated 4.9/5 5 stars by 110+ New York City businesses

Intrusion detection system design: what decides the scope and the cost

For a commercial burglar alarm, perimeter sensors catch entry early and interior sensors confirm it.

SensorWhat it detectsWhere it fits
Door and window contactsAn opening at the perimeterExterior doors, roof hatches, stock rooms
Motion detectors (PIR)Movement inside a protected areaOffices, corridors, sales floors after close
Dual-technology detectorsMovement confirmed by two methodsSpaces with heaters, vents or moving signage
Glass-break detectorsThe sound of breaking glassStorefronts and glazed lobbies
Vibration and seismic sensorsAn attack on a wall, safe or vaultSafes, cash rooms, high-value storage
Environmental sensorsWater leaks or temperature out of rangeServer rooms, basements, cold storage

Monitoring and NYC rules

Your monitoring choice decides who responds when the alarm trips.

01 / 03

Monitored or local

What we deliver

Central station monitoring, or a local alarm that alerts your team.

Why it matters

A central station alerts emergency services or security personnel once an event is confirmed. Local systems suit a staffed desk.

02 / 03

NYC 15-minute rule

What we deliver

Siren timers set at design to the city's noise code.

Why it matters

Under the NYC noise code, an audible building burglar alarm must shut off automatically within 15 minutes.

03 / 03

Egress doors

What we deliver

Fail-safe or fail-secure locks specified door by door.

Why it matters

Where alarms and electrified locks share a door, the lock meets egress code.

Alarm system installation process

Alarm system installation in NYC takes five steps, scheduled around tenants.

  1. 01

    Survey

    We check the existing panel and wiring, so you know what can be reused.

  2. 02

    Design

    You approve the sensor plan, partitions, user groups and monitoring model.

  3. 03

    Installation

    Sensors, panel and wiring, scheduled around tenants.

  4. 04

    Testing and training

    Every zone and panic device tested; your users trained to arm and disarm.

  5. 05

    Support

    A 12-month warranty, plus security maintenance plans for testing and firmware.

FAQs

Commercial alarm system FAQs

How much does a commercial alarm system cost in NYC?

A commercial alarm system's cost in NYC depends on sensor count, partitions, wired or wireless devices, integration and the monitoring model. We price from a site survey; our guide to commercial alarm system cost explains each driver.

Do you install fire alarm systems?

No, we do not install fire alarm systems, and we do no fire alarm work. Our scope is intrusion detection, emergency alerts and access control; where locks must release on fire alarm activation, the building's fire alarm contractor makes that connection.

How does an intrusion detection system differ from a panic alarm?

An intrusion detection system differs from a panic alarm in who triggers it. Intrusion sensors detect unauthorized entry automatically, usually after hours; a panic alarm is triggered by a person who needs help.

Should a business alarm system be wired or wireless?

Whether a business alarm system should be wired or wireless depends on the building. Wired is the most durable where cable can run; wireless suits finished suites and historic interiors. Either can be smart, with arming and real-time alerts on a phone, and a retrofit keeps sound wiring in place.

Can you replace an existing commercial burglar alarm?

Yes, we can replace an existing commercial burglar alarm, reusing sound sensors and wiring and adding integration with doors and cameras. We also take over systems from all major brands, including those installed by others, under a managed service plan: 24/7 support for managed-service clients, with a 4-hour response on critical failures.

How long does business alarm system installation take?

Business alarm system installation usually takes 1–2 days for small and mid-size scopes. Larger or multi-tenant buildings are phased floor by floor so the building stays protected.

Request an alarm site assessment

Tell us about the building. We'll design alerts that work with your access control system.

Rated 4.9/5 5 stars by 110+ New York City businesses

Call Site assessment