• 1,000+

    installations over 10+ years

  • 24/7

    support for managed-service clients

  • Excellent

    Rated 4.9/5 by 110+ NYC corporations

  • 7 Active Teams

    Operating throughout New York

Project at a glance

Highline Integrated Security delivered landmark-compliant access control at 627 West End Avenue, for a project team of Bridge Zale Construction Corp., SyndicateBuild Architects and Cirgenski+Company.

Project type
Landmark retrofit: modern access and entry in a historic building
Location
627 West End Avenue, Upper West Side, Manhattan
Building type
19th-century brownstone, landmark
Project team
Bridge Zale Construction Corp.; SyndicateBuild Architects; Cirgenski+Company
Scope
Access control, IP intercom, heritage-style door hardware

The challenge: modern access, 19th-century fabric

The challenge was to upgrade access and door hardware without compromising the building's 19th-century integrity. Historic buildings limit what can be seen and what can be cut.

  • Visible hardware is regulated

    Readers, intercom panels and locks on historic facades and doors must respect the original design.

  • Preservation requirements apply

    Every new component had to meet them.

Our approach: preservation first, technology second

We started from what the building would allow, then fitted the technology to it.

  1. 01

    Start from the preservation requirements

    Each product choice had to meet them before it was specified.

  2. 02

    Select heritage-style hardware

    We chose hardware to match the building's period character while meeting preservation requirements.

  3. 03

    Add modern access control

    We added controlled entry without altering the historic appearance of the doors.

  4. 04

    Install the IP intercom

    We installed a network-based intercom for visitor entry.

On a landmark door, the lock, trim and intercom are one design problem. Solving them as one team kept hardware, entry and preservation requirements aligned.

What we installed

The scope combined door hardware, access control and entry.

SystemLayerHow it respects the landmark
Heritage-style door hardwarePhysical hardwareMatches the building's period character
Access controlPhysical hardware and softwareAdds controlled entry without altering the doors' historic appearance
IP intercomEntryNetwork-based visitor entry at the historic entrance

The result

627 West End Avenue gained modern access and entry while keeping its 19th-century character.

  • Better security and function

    at the entrance.

  • Historic character preserved

    , with new technology integrated into the original design.

  • Preservation requirements met

    by the heritage-style hardware.

Request a site assessment (on-site or virtual) · Call 917-473-8077

How landmark rules shape access control design

Landmark rules shape access control design before any product is chosen. Work on designated buildings may need a Landmarks Preservation Commission permit, and some interiors are regulated too.

ConstraintDesign response
Visible exterior features are regulatedPeriod-matched trim and finishes; readers and intercom panels sized and placed with the architect
Surface cabling on historic fabric is restrictedConcealed routing through frames and walls
Wiring a door is impracticalBattery-powered wireless locks that join the networked access system without door wiring
Approvals take timeHardware and routing planned at design stage, so the approval path is clear early

Door hardware is the physical layer of access control. We engineer and fabricate doors and door hardware in-house, so that layer is never subcontracted.

Related services

The services and projects closest to landmark access work.

FAQs

Landmark-compliant access control: FAQs

Short answers on landmark approvals, hidden wiring, intercoms and heritage hardware.

Can landmark buildings have modern access control?

Landmark buildings can have modern access control when hardware and wiring are designed around preservation rules. At 627 West End Avenue, access control and IP intercom were added with heritage-style hardware.

Do I need Landmarks Preservation Commission approval for security work?

You may need Landmarks Preservation Commission approval for security work if it changes visible exterior features or regulated interiors. We plan hardware and routing with the architect so the approval path is clear early.

How do you avoid visible wiring on historic doors?

Visible wiring on historic doors is avoided through concealed routing through frames and walls, or wireless battery locks where routing is not possible. The method depends on the door and what the approval allows.

Can an IP intercom match a historic entrance?

An IP intercom can match a historic entrance when the panel, finish and mounting are selected with the architect. At 627 West End Avenue, the IP intercom went in alongside heritage-style hardware that met preservation requirements.

Where can heritage door hardware carry access control?

Heritage door hardware can carry access control wherever the lock and trim can house or conceal the electronics. Because we fabricate hardware in-house, we can match period profiles and still install modern access components.

Working on a landmark or historic building?

Bring us in at design stage, before hardware is specified.

Rated 4.9/5 5 stars by 110+ New York City businesses

Call Site assessment