K-12 Access Control: Lexington School for the Deaf
- NDAA-compliant access control
- Two ADA-compliant entrances
- Existing doors retrofitted
On-premises K-12 access control and two new ADA-compliant entrances, delivered in Queens.
- 1,000+
installations over 10+ years
- 24/7
support for managed-service clients
- Excellent
Rated 4.9/5 by 110+ NYC corporations
- 7 Active Teams
Operating throughout New York
Project at a glance
K-12 access control at Lexington School for the Deaf combined door hardware, accessibility and an on-premises platform in one project.
- Client
- Lexington School for the Deaf
- Sector
- K-12 education
- Location
- Queens, New York
- Building type
- Existing school building
- Scope
- Electrified retrofit hardware, NDAA-compliant on-premises access control, two new ADA-compliant swinging doors
- Platform
- Salto, hosted on premises
- Year
- 2025
The challenge
The school needed modern access control inside an existing building, under three constraints that shaped every decision.
Federal compliance
The system had to be NDAA-compliant, which limits which manufacturers' equipment can be specified.
Hosting on site
The school wanted the platform on its own premises, so credentials and event logs stay on its own network.
Accessibility for every user
A school serving deaf and hard-of-hearing students needs doors that every student, parent and visitor can operate. Some existing openings could not meet that with hardware alone.
Our approach
We treated door hardware, accessibility and the platform as one design, owned by one team.
- 01
Settle the platform rules first
NDAA compliance and on-premises hosting were fixed at design stage, because together they decide which hardware can be specified.
- 02
Retrofit before replacing
Electrified retrofit hardware was installed on existing doors.
- 03
Replace only where access required it
Two openings got new ADA-compliant swinging doors.
- 04
Deliver the platform on site
As a certified Salto dealer, we delivered Salto access control hosted on the school's premises.
- 05
Keep accountability in one place
The same team specified the hardware, installed the new doors and configured the access control system, so compliance at each door was settled once.
What we installed
Each layer of the K-12 access control system came from the same team.
| Layer | What we installed | Why it matters for a school |
|---|---|---|
| Door hardware | Electrified retrofit hardware on existing doors | Controlled access without replacing sound doors and frames |
| Accessibility | Two new ADA-compliant swinging doors | Accessible entry where the old openings could not provide it |
| Platform | Salto access control, NDAA-compliant, hosted on premises | Credential data and event logs stay on the school's own network |
The result
Lexington School for the Deaf now runs NDAA-compliant, on-premises access control on its existing doors, with two new ADA-compliant entrances.
Compliance settled at design
The platform and hardware were chosen to NDAA rules from the start, not checked after purchase.
Data under the school's control
The system runs on the school's premises.
One accountable partner
Retrofit access control fails most often at the door, when a lock does not suit the frame or a device breaks egress or ADA rules. Here, one team owned hardware, doors and platform.
What schools should decide before choosing access control
K-12 access control is a 10–20-year infrastructure decision, so the platform rules matter more than the first price.
NDAA Section 889
Projects using federal funds cannot spend them on covered video and telecommunications equipment from restricted manufacturers. NDAA compliant access control avoids that equipment from the outset.
Hosting model
Cloud, on-premises and hybrid each have a place. A school should be able to change model later without replacing every lock.
Vendor lock-in
Watch for licensing that breaks when budgets change and hardware that stops working when a subscription lapses. Locks should keep working offline.
Accessibility
Under the 2010 ADA Standards, operable parts must work without tight grasping, pinching or twisting of the wrist.
Egress
Every electrified door is set fail-safe or fail-secure to code, with fire alarm release coordinated with the fire alarm vendor.
Planning access control for a school? Start with a design review of your doors, compliance rules and hosting model.
Request a site assessment (on-site or virtual) · Call 917-473-8077
Related services
The services behind this project.
FAQs
K-12 access control: FAQs
Short answers on retrofitting school doors, NDAA rules, hosting and ADA doors.
Can K-12 access control be retrofitted to existing school doors?
K-12 access control can be retrofitted to existing school doors when the doors and frames are sound. At Lexington, electrified retrofit hardware went onto existing doors, and new ADA doors were added only where needed.
What does NDAA-compliant access control mean?
NDAA-compliant access control means the system avoids equipment from manufacturers restricted under Section 889 of the National Defense Authorization Act. It matters most for schools and public bodies spending federal funds.
Should a school choose on-premises or cloud access control?
Whether a school should choose on-premises or cloud access control depends on its IT policy, funding and data rules. Lexington chose on premises; either way, the school should be able to change model later.
When does a school need ADA-compliant doors rather than new hardware?
A school needs ADA-compliant doors rather than new hardware when the opening itself cannot provide accessible entry. At Lexington, that applied to two openings.
Upgrading access control in a school?
We'll survey the doors and show you what can be retrofitted and what needs replacing.
