NYC Ballet Training Center Security
- On time, within budget
- Custom doors
- Cold-plunge pull-cord alarm
Custom doors, a cold-plunge pull-cord alarm and full wiring, on time and within budget.
- 1,000+
installations over 10+ years
- 24/7
support for managed-service clients
- Excellent
Rated 4.9/5 by 110+ NYC corporations
- 7 Active Teams
Operating throughout New York
Project at a glance
Highline Integrated Security delivered NYC Ballet training center security for the David H. Koch Training Center in 2025, working with MAD and SPK/Lewis.
- Client and sector
- New York City Ballet · Performing arts training
- Facility
- David H. Koch Training Center, New York City
- Building type
- Older building; fifth floor renovated into a modern training center
- Project partners
- MAD; SPK/Lewis (general contractor)
- Scope
- Custom doors, emergency pull-cord alarm for a cold plunge, comprehensive wiring
- Year
- 2025
- Delivery
- On time and within budget
The challenge: an older building and many parties
Institutional security systems had to be built into an older building during a full-floor renovation, with several parties working at once.
The building's age
Existing structure and pathways limited where doors, devices and cable could go.
Multi-party coordination
The work had to align with the client, the general contractor and multiple trades.
A new safety point
The cold plunge needed a way for someone in difficulty to call for help.
Doors that had to fit
The renovated training spaces called for doors made to suit them.
Our approach: doors, alarm and wiring from one team
We delivered the doors, the alarm and the wiring as one scope, coordinated with the client, MAD and SPK/Lewis.
- 01
Plan around the existing structure
We set door openings, device locations and cable routes to suit what the older building allowed.
- 02
Engineer and fabricate the custom doors
We made the doors in-house to suit the renovated training spaces.
- 03
Install the cold plunge pull-cord alarm
We placed an emergency pull-cord alarm at the cold plunge as a staff alert point.
- 04
Run comprehensive wiring
We ran cabling for the alarm and associated systems through the existing structure.
- 05
Coordinate every party
We aligned our sequence with the client, MAD, SPK/Lewis and the trades.
Here, the GC coordinated the doors, the alarm and the wiring with one company.
What we installed
The training center scope covered three elements across two layers.
| Element | Layer | What it does |
|---|---|---|
| Custom doors | Physical hardware | Engineered and fabricated in-house to suit the renovated training spaces |
| Emergency pull-cord alarm | Physical hardware | Lets a person at the cold plunge call for help |
| Comprehensive wiring | Infrastructure | Carries the alarm and associated systems through the existing structure |
The result
The project was completed on time and within budget, despite the building's age and the number of parties involved.
A fully operational training center
on the renovated fifth floor.
Improved safety and functionality
for dancers and staff.
Request a site assessment (on-site or virtual) · Call 917-473-8077
Designing a cold plunge emergency alarm
A cold plunge emergency alarm should be designed with the operator before the walls close. Cold-water immersion can affect breathing and movement, and users are often alone.
Reach
The pull cord should be reachable from inside the plunge and from the floor beside it.
Where it sounds
The alarm should annunciate at a point that is staffed whenever the plunge is in use.
Who responds
Agree the responder and the response route at design stage, not after handover.
Wet-area devices
Devices and terminations near water need ratings suited to wet and humid locations.
Testing
Test the alarm end to end at handover and regularly after.
Related services
The services and projects closest to this renovation.
- Security for cultural institutions (→ /cultural-institutions-security-nyc/)
- Gym and fitness facility security (→ /gym-fitness-facilities-security-nyc/)
- Commercial alarm and emergency alert systems (→ /alarm-systems-nyc/)
- Commercial door repair and installation (→ /commercial-door-repair-nyc/)
- David H. Koch Theater upgrade (→ /case-study/david-h-koch-theater-lincoln-center-plaza)
FAQs
NYC Ballet training center security: FAQs
Short answers on the scope, cold plunge alarms, older buildings and custom doors.
What security work did Highline do for New York City Ballet?
The security work Highline did for New York City Ballet covered custom doors, an emergency pull-cord alarm for a cold plunge and comprehensive wiring. It was delivered on the fifth floor of the David H. Koch Training Center.
Where should an emergency pull cord go near a cold plunge?
An emergency pull cord near a cold plunge should be reachable from inside the plunge and from the floor beside it. Placement and response are agreed with the operator at design stage.
Can security work fit into an older building renovation?
Security work can fit into an older building renovation when pathways are planned early and the scope is coordinated with the GC. This project finished on time and within budget.
Does Highline make custom doors for renovations?
Highline makes custom doors for renovations as part of its security and access control work. We engineer and fabricate them in-house, as we did for this training center.
Who does Highline coordinate with on institutional renovation projects?
On institutional renovation projects, Highline coordinates with the client, the design team and the general contractor. Here, that meant New York City Ballet, MAD and SPK/Lewis.
Renovating a training, wellness or institutional space?
Bring safety systems into the design before the walls close.
